FALL-PAC: CREATING SAFER ENVIRONMENTS

As 2026 draws to a close, many businesses are already looking ahead to the new year. Projects are being scheduled, budgets are being reviewed and plans are taking shape for the months ahead.

But while deadlines, resources and productivity often take centre stage, there’s one question that shouldn’t be overlooked:

Is your fall protection ready for the demands of 2027?

For businesses operating in construction, transport, aerospace and other industries where working at height is part of everyday operations, the start of a new year is an ideal opportunity to review existing safety arrangements.

At Safety Pack, we believe that preparing for a successful year starts with making sure the right protection is in place before work begins.

A New Year Doesn’t Mean the Same Old Risks

It’s easy to assume that because safety arrangements worked well throughout the previous year, they’ll continue to be suitable for the next.

But workplaces change.

New projects bring different working heights, unfamiliar environments and changing access requirements. Equipment that was suitable for one contract may not be appropriate for another, while busy schedules can place additional pressure on site teams.

Even businesses carrying out similar work year after year should take time to reassess their arrangements.

The question isn’t simply whether you have fall protection equipment available. It’s whether that equipment is suitable for the work you’re planning.

Taking the time to review your requirements now could help prevent avoidable complications when projects get underway in January.

Five Fall Protection Checks to Make Before 2027

A new year provides a useful opportunity to look at what’s working, identify areas for improvement and make sure safety remains a priority.

Here are five things worth reviewing before your next project begins.

  1. Review Your Upcoming Working-at-Height Activities

Start by looking at the projects already planned for 2027.

Will teams be working at different heights? Are you moving into new environments? Will multiple contractors need access to the same areas?

These details can influence the type of fall protection required.

Working at height should always be properly planned and risk assessed, with measures to avoid falls or prevent them taking priority wherever reasonably practicable.

Where a risk of falling remains, suitable fall arrest equipment may help minimise the consequences.

Planning ahead gives businesses more time to identify appropriate solutions rather than making rushed decisions once work is underway.

  1. Check the Condition of Existing Equipment

When was the last time your fall protection equipment was thoroughly inspected?

Equipment may have been transported between sites, placed in storage or exposed to demanding working conditions throughout the year.

Before bringing it into use for another project, it’s important to confirm that it remains in suitable condition.

Look for signs of damage, deterioration or anything that could affect performance, following the manufacturer’s inspection requirements.

At Safety Pack, we offer on-site inspection services to help businesses assess their Fall-Pac equipment.

Starting the year with properly inspected equipment is an important part of maintaining effective fall protection arrangements.

  1. Consider Whether Your Equipment Still Meets Your Needs

The right fall protection solution for one project won’t necessarily be the best choice for the next.

For example, a business moving between several working areas may benefit from equipment that’s portable and straightforward to reposition.

Our standard Fall-Pac Units provide 1.61m² of coverage per unit and feature interlocking clips that allow multiple units to be connected to create a larger protected landing area.

For suitable applications requiring different working heights, Fall Pac Air offers another practical option.

Its individual air-pocket design provides impact absorption without the need for on-site inflation equipment. When correctly specified and installed, a single layer can provide protection for working heights up to 3.7 metres, while a double-layer configuration can extend protection up to 6.5 metres.

Reviewing your requirements before the new year can help you identify which system is appropriate for your planned activities.

  1. Make Sure Your Team Is Prepared

Even the most carefully developed safety equipment depends on correct selection, installation and use.

As new projects begin, businesses may welcome additional workers, introduce new working procedures or move existing teams into unfamiliar environments.

That’s why training and communication should be part of your new year preparations.

Are workers familiar with the equipment they’ll be using? Do supervisors understand the relevant installation requirements? Does everyone know how to report damaged equipment or changes in working conditions?

At Safety Pack, we provide working-at-height training to support businesses in maintaining safe working practices.

A well-prepared team is better placed to recognise risks and respond appropriately when circumstances change.

  1. Plan Ahead for Equipment Hire or Purchase

January can bring a busy start for businesses with new contracts and projects beginning after the Christmas break.

Leaving fall protection arrangements until the last minute can create unnecessary pressure, particularly when several sites require equipment at the same time.

Planning ahead allows you to consider whether hiring or purchasing is the most practical option.

For short-term projects, hiring Fall-Pac equipment may offer the flexibility you need without committing to a permanent purchase.

For businesses with regular working-at-height requirements, purchasing equipment may provide a more suitable long-term solution.

Safety Pack offers both hire and purchase options, helping customers find an approach that fits their operational requirements.

Why Fall Protection Should Be Part of Your 2027 Planning

When businesses prepare for a new year, attention naturally turns to improving efficiency, managing costs and keeping projects on schedule.

But safety planning should be part of those conversations from the beginning.

Choosing appropriate fall protection early can help businesses coordinate equipment requirements, plan installations and prepare teams before work starts.

It also provides an opportunity to review whether existing systems remain suitable for the environments in which they’ll be used.

At Safety Pack, our Fall-Pac range has been developed with practical working environments in mind.

Our UK-manufactured systems are supported by ongoing product testing, with in-house drop testing carried out monthly in accordance with PAS 59:2014 requirements.

Combined with our inspection, training and equipment management services, this helps businesses make informed decisions about their fall protection requirements.

Make 2027 the Year You Plan Ahead

A new year brings new opportunities, new projects and new challenges.

It also offers the chance to review established routines and make improvements before the demands of another busy working year take over.

Whether you’re preparing for a major construction project, reviewing safety arrangements across multiple sites or simply checking that your existing equipment remains suitable, taking action early can make a difference.

At Safety Pack, we’re here to help businesses find practical fall protection solutions that suit their working environments.

Planning your working-at-height requirements for 2027?

Contact Safety Pack today to discuss your upcoming projects, explore our Fall-Pac range and find out how our hire, purchase, inspection and training services can support your plans.

Start the new year prepared. Make fall protection part of your 2027 plans.

Need advice about whether Fall-Pac could protect or train your workers?

Want to know how else we can protect your business from the risks of working at height? Talk with the team – 0800 652 8099 | sales@fall-pac.com

Get in touch with Fall-Pac today